Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open a Stuck Boot Lid on a Mini Cooper

Model: Mini Mini R53, R50, R52 - Years 2001-2007
Part: Checks and maintenance

In a Mini Cooper, the rear boot lid may get stuck, for example, due to a fault with the control button or the lock actuator. In these cases, it is still possible to perform an emergency opening by following the simple procedure shown in this video. First, open the rear doors, then grab the seat base and lift it. Next, locate the indicated ring and pull it towards the front of the vehicle to unlock the lock. At this point, you will be able to open the boot lid and repair the faulty component.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to open the fuel door that is locked in the Mini Cooper?
How to open the fuel door that is locked in the Mini Cooper?
Mini (2007-2014 / R55, R57, R56) In a Mini Cooper, it can happen that the fuel door gets stuck, for example due to a problem with the related button or lock actuator. In these cases,…
How to open the rear hatch from the inside of the Mini Cooper.
How to open the rear hatch from the inside of the Mini Cooper.
Mini (2001-2007 / R53, R50, R52) We will briefly see the instructions that will allow us to manually open the rear trunk hatch from inside the Mini Cooper in case of an emergency. Fi…
How to open tailgate with dead battery on Mini Cooper
How to open tailgate with dead battery on Mini Cooper
Mini (2001-2007 / R53, R50, R52) In today's video tutorial we will see the necessary guide that will allow us to open the tailgate of the trunk, with a flat battery, of the Mini Coop…

    Frequently Asked Questions

    • Mini 2014-2023 - How much is the coupon for the Mini Cooper? Read answer
    • Mini 2007-2014 - Where is the Mini Cooper horn located? Read answer

How to Replace the Front Bumper on a BMW 3 Series

This simple operation will be illustrated in this short video guide. As the first step, raise the hood to access and remove the bolts securing the top of the bumper. Next, remove the bolts and clips that attach the inner fender to the rear of the bumper. This operation will need to be repeated on both sides. Also, remove the screws that secure the bottom of the bumper to the lower engine cover. Now, just pull the bumper away, being careful to disconnect the connectors at the back.

Watch the video!


by ScegliAuto

More videos