Do it yourself
| ||||
|
Mini - Video tutorial
Model: Mini Mini
F55, F57, F56
- Years 2014-2023 In this video, the procedure for replacing the battery on a 2017 Mini Cooper Clubman is shown. To replace it, first open the hood and secure it with the appropriate hooks. Then, remove the intake neck cover elements. To remove it, first remove the bolts with a 10-millimeter wrench. Once the bolts are removed, apply pressure on the clips to remove the cover. Once the intake neck cover is removed, remove the intake silencer housing. To do this, first remove the rubber stopper, then remove the fastening bolts with a 10-millimeter wrench. After that, unlock the connector with a flathead screwdriver, then press on the tab with your fingers to remove it. At this point, use a 7-millimeter wrench to unlock the clamp. Now remove the intake filter housing. After removing the filter housing, loosen the battery cover fastenings with an 8-millimeter wrench. Then, remove the cover and move the hood seal to the side. With a 10-millimeter wrench, remove the fastening on the hood seal mount. Now release the expansion rivet, remove the support, remove the tension strut fastenings with a 13-millimeter wrench, remove the tension strut, remove the front grille panel cover, and now you can access the battery. Now loosen the negative battery cable fastening device with a 10-millimeter wrench, remove the negative cable, loosen the positive fastenings, and then remove the positive cable. Remove the vent hose from the side of the battery, loosen the battery fastening device with a 13-millimeter wrench, and then remove it to extract the battery. At this point, install the new battery and close everything by screwing all the fastening elements.
Posted on 18 November 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow do I unlock the automatic transmission of the BMW 3 Series?In order to unlock the automatic transmission of the BMW 3 Series, the Start / Stop button and the lever release button must be pressed at the same time. This procedure will allow the car gearbox to be unlocked for about 15 minutes, so that in the event of an engine failure, the car can still be moved. It may be necessary to repeat the operation more than once for its success. After unlocking the gearbox, it can return to its original state by simply waiting for the aforementioned 15 minutes, or by pushing the release lever forward for a few seconds. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.039
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |