Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the gear shift knob of the Mini Cooper.

Model: Mini Mini F57, F56, F54, F55 - Years 2014-2023
Part: Shift knob

Today's guide will show us how to disassemble and replace the gear shift knob of the Mini Cooper. First, let's get inside the car and start by detaching and removing the knob and the boot from the lever; to do this, simply pull upwards with force, as shown in the video. At this point, let's separate the boot from the gear shift knob, so that we can install the new one; then, let's attach the knob to the boot of the gear shift, and proceed to reassemble everything onto the gear lever. Let's make sure that everything is securely attached to the lever, without any play between the knob and the lever itself.

Posted on 19 December 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob of the Mini Cooper.
How to replace the gear knob of the Mini Cooper.
Mini (2001-2007 / R52, R53, R50) Today's guide will show us the necessary information to disassemble and replace the gear knob of the Mini Cooper. First, we get inside the car and st…
How to replace the gear knob of the Mini Cooper
How to replace the gear knob of the Mini Cooper
Mini (2007-2014 / R57, R55, R56) Today we will explain how to replace the gear knob of the Mini Cooper model R 56. To replace the knob, we need to grab the knob with one hand and wit…
How to disassemble and replace the Mini Cooper gear knob
How to disassemble and replace the Mini Cooper gear knob
Mini (2001-2007 / R52, R53, R50) Let's see in this short and simple guide the steps on how to disassemble and replace the Mini Cooper gear knob. First we get on board the car and sta…

How to Remove the Front Brake Pads on a Chrysler PT Cruiser

To remove the front brake pads on a Chrysler PT Cruiser, position the car on a column lift and raise it to a comfortable height. Unscrew the pins using a socket wrench or air drill and remove the wheel. Then, use a screwdriver to detach the brake pads. Next, remove the caliper bracket and unscrew the pins on the brake disc (using a Torx screwdriver). Pull the disc towards you to slide it off the hub. Install the new brake disc with all associated pins, secure the caliper bracket to the disc and the pads, then mount the brake caliper, ensuring all pins are tightened properly. Before mounting the wheel, bleed the brake caliper and tighten the pin.

Watch the video!


by ScegliAuto

More videos