Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mini
    3. :
  3. Mini
    4. : How to remove Mini rear light

Mini - Video tutorial

Model: Mini Mini R56, R55, R57 - Years 2007-2014
Part: Tail light
Operation: How to remove Mini rear light

How to remove a rear light from your Mini? Let's see how to do it right away in this video. In the Mini it is very easy to remove a rear light, so with a plastic spatula we remove the chrome frame and unscrew the screws of the headlight perimeter with a screwdriver. We leverage the light, pull it out of its seat and disconnect the power supply terminals. Now that the rear light is removed, let's compare it with the new one, if it should be the same as the old one, we can mount it. Let's start with connecting the light clamps to the headlight and insert it into the sheet of the car pushing it towards the frame. Once this is done, we screw in the screws and finish with mounting the frame. Finally, we check the correct functioning of the lights, always remembering to always mount homologated headlights and parts.


Posted on 27 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Mini 2007-2014 - How do you remove the rear light of the Mini Cooper? Read Answer
    • Mini 2007-2014 - How to remove the rear light of the Mini Cooper convertible? Read Answer

How do you reset the AdBlue warning light on the Dacia Duster?

The AdBlue warning light on the Dacia Duster appears on the instrument panel when the additional fluid level inside the special tank is low and it is necessary to top up. To do this, you will need to open the fuel flap and unscrew the cap next to that of the fuel tank. Then it will be possible to put the additional liquid inside the tank, until it is completely filled. In this way, it will be possible to verify that the AdBlue warning light has disappeared from the instrument panel: if the warning light stays on, it is likely that the sensor does not detect the liquid as this has a low concentration of urea.

Watch the video!


by ScegliAuto

More videos