Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on a Mini

Model: Mini Mini R56, R57, R55 - Years 2007-2014
Part: Brake pads

In this video, learn how to replace the brake pads and disc on a Mini. Position your car on a column lift and raise it to a comfortable height. Unscrew the bolts with a socket spanner or air drill and remove the wheel, then start unscrewing the bolts of the brake caliper to detach it from the bracket. Use a screwdriver to detach the brake pads, then remove the caliper bracket and unscrew the bolts on the brake disc (use a Torx screwdriver). Pull the disc towards you to slide it off the hub. Clean and lubricate all parts for reassembly. Fit the new brake disc with all associated bolts, tighten the caliper bracket to the disc and the new pads, then refit the brake caliper, ensuring all bolts are tightened properly. Before fitting the wheel, bleed the brake caliper and tighten the bolt. Finally, fit the wheel with the bolts.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front brake pads of the Mini
Replacement of the front brake pads of the Mini
Mini (2001-2007 / R52, R50, R53) Let's see how to proceed to replace the front brake pads of the Mini. We open the hood, unscrew the cover of the brake fluid reservoir, remove the co…
How to Replace Brake Pads on a Mini
Mini (2007-2014 / R56, R57, R55) First, remove the wheel on which you need to replace the brake pads. Ensure you have jack stands to support your vehicle. Now, remove the bolts secur…
Replacement of the rear brake pads of the Mini.
Replacement of the rear brake pads of the Mini.
Mini (2001-2007 / R52, R50, R53) To replace the rear brake pads of the Mini, we start by opening the engine hood and unscrewing the cap of the brake fluid reservoir. We loosen the wh…

Other guides you may be interested in

How to Adjust the Handbrake on VW Polo

If pulling the handbrake lever results in a long travel distance, significantly exceeding the usual 4 to 5 clicks, it means you need to adjust the travel to compensate for cable slack and wear on the shoes. This is a manual operation carried out using the adjustment nuts located at the base of the handbrake lever. Release and lift the plastic cover at the base of the lever to access the cables (one for each shoe) and their respective adjusters. First, loosen the lock nut and tighten the nut to pull the cable until the lever achieves a travel of 4 to 5 clicks.

Watch the video!


by ScegliAuto

More videos