Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Mini Cooper convertible top

Model: Mini Mini R52, R50, R53 - Years 2001-2007
Part: Convertible top

Today we will see the step-by-step instructions on how to disassemble and replace the hood of the Mini Cooper, in simple and quick steps. First, we open the front doors of the car and the rear hatch; now we proceed to detach the hood at the back, then detach the front part of the hood from the plastic frame, as shown in the video. At this point, we unscrew the screws located in the center of the hood, performing the same operation on the rear part; then we detach the hood from the side pillars, removing it and replacing it with the new one. Apply the reverse process for reassembly!

Posted on 26 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Mini Cooper soft top
Removing the Mini Cooper soft top
Mini (2007-2014 / R56, R57, R55) In this video tutorial we will see how to remove the soft top of a Mini Cooper R57. First we get inside the car and go to completely lower the window…
How to calibrate the convertible top motor of the Mini Cooper
How to calibrate the convertible top motor of the Mini Cooper
Mini (2001-2007 / R52, R50, R53) In this short and simple guide, we will show you how to calibrate the convertible top motor of the Mini Cooper. First of all, get into the car and st…
How to reset and learn the Mini Cooper's convertible top
How to reset and learn the Mini Cooper's convertible top
Mini (2007-2014 / R56, R57, R55) Today's main instructions will show us how to reset and learn the mechanism of the Mini Cooper's convertible top. To perform the learning, you will n…

How to Remove the Armrest on the Centre Tunnel of a Volkswagen Golf

Let’s see how to remove the armrest on the centre tunnel of a Volkswagen Golf. Unscrew the securing screws (located inside the cup holder) with a screwdriver; use a plastic lever to pry off the cover at the rear of the centre tunnel (air vents). After removing the plastic cover, unscrew the securing bolts in the centre armrest using a socket wrench. Once this is done, pull off the tunnel and disconnect any power cables. Finally, insert the new part into the centre tunnel, and reassemble all components of the glove compartment as previously disassembled.

Watch the video!


by ScegliAuto

More videos