Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Mitsubishi Triton

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Service warning light

In the following guide aimed at all of you who own a Mitsubishi Triton (also called L200), we will explain how you can manually reset the service light in a few seconds and in total safety. First of all, reach the driver's seat and turn on the instrument panel, then locate the small button located below the display and press it several times until the icon of a wrench appears. At this point, hold down the button until the display stops flashing. Finally, press it one last time to complete the reset of the service light.

Posted on 6 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Centre Tunnel of Mitsubishi L200-Triton
Removing the Centre Tunnel of Mitsubishi L200-Triton
Mitsubishi L 200 (2005-2015 / MK 2) In this video tutorial, you will learn how to remove the centre tunnel of a Mitsubishi L200 or Triton, second series. First, get inside the car and r…
How to Reset the Service Light on a Mitsubishi L 200 Triton 2018
How to Reset the Service Light on a Mitsubishi L 200 Triton 2018
Mitsubishi L 200 (2015-2024 / MK 3) In this guide for all of you who own a Mitsubishi L 200 (2018 model year), also known as Mitsubishi Triton, we will explain how to manually reset the…
How to Remove the Spare Wheel from the Mitsubishi Triton - L200
How to Remove the Spare Wheel from the Mitsubishi Triton - L200
Mitsubishi L 200 (2015-2024 / MK 3) In this tutorial, you will learn how to remove and replace the wheel with the spare wheel of the Mitsubishi Triton and L200. First, move to the rear …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos