Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Refit the Original Stereo on a Mitsubishi Colt

Model: Mitsubishi Colt MK 1, Z30 - Years 2004-2012
Part: Car stereo

Let's see how to remove and refit the original stereo on a Mitsubishi Colt. First, use a plastic lever to detach the plastics of the radio located under the air vent grilles, then, using a screwdriver, unscrew the securing screws located on the metal tabs at the sides of the dashboard, and extract the radio. Now, fit the new frame onto the dashboard, connect the various power connectors located at the back of the stereo and the antenna reception cable. Insert the new stereo into the slot with the appropriate adapter for 2 DIN. Finally, test the new stereo.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Original Radio from a Mitsubishi Colt
How to Remove the Original Radio from a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) How to remove the original radio from a Mitsubishi Colt? Carefully follow these steps to execute the removal: use the original or aftermarket metal k…
How to Replace the Standard Radio of a Mitsubishi Colt
How to Replace the Standard Radio of a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) Below are the instructions that will allow you to remove and replace the standard radio of a Mitsubishi Colt in simple steps. First, get inside the v…
How to Remove the Radio from a Mitsubishi Colt
How to Remove the Radio from a Mitsubishi Colt
Mitsubishi Colt (2004-2012 / MK 1, Z30) In this video, you will see how to easily remove the radio from the dashboard of a Mitsubishi Colt. The key thing is to have the proper tools for thi…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos