Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Antenna on a Mitsubishi Pajero

Model: Mitsubishi Pajero V80, MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Antenna

See other generations:
Video tutorial

Unscrew the outer part of the antenna by hand, then unscrew the base using the method shown in the video: cover it with a cloth (to avoid scratching) and unscrew it with pliers. Remove the extendable antenna and proceed in reverse for reassembly, inserting the new antenna you purchased (which can easily be bought online) and obviously corresponds to the one removed.

Screw the antenna back in and you're done. Test the new antenna immediately to avoid surprises.

This is a simple operation and within reach of even less experienced mechanics.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

Mitsubishi Pajero (1999-2006 / V60, MK 3) Any fuse of the Mitsubishi Pajero is located inside one of the specific fuse boxes that are installed inside the vehicle: these will be positioned in…
Mitsubishi Pajero (1999-2006 / V60, MK 3) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
Mitsubishi Pajero (1999-2006 / V60, MK 3) Remove the trim surround around the radio using a plastic lever (where the air vents are located). Once the cover panels above the centre console are…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos