Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radio on Mitsubishi Pajero

Model: Mitsubishi Pajero MK 3, V60 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Car stereo

Video tutorial

Remove the trim surround around the radio using a plastic lever (where the air vents are located). Once the cover panels above the centre console are removed, unscrew the securing screws located on either side of the radio.

Pull the radio out completely after removing the screws. Disconnect the cables (power and antenna) by hand.

To reassemble, reverse the disassembly steps. Turn on the radio to test its operation.


Updated on 6 May 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / MK 3, V60) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
Location of Fuse Box on Mitsubishi Pajero
Location of Fuse Box on Mitsubishi Pajero
Mitsubishi Pajero (1991-1999 / V20, MK 2) Sit in the driver's seat and look down to the left: the internal fuse box on the Mitsubishi Pajero is located there, just below and to the left of th…
Removing the Radio from the Dashboard on Pajero
Removing the Radio from the Dashboard on Pajero
Mitsubishi Pajero (2006-2021 / V80, MK 4) Let’s look at removing the radio from the dashboard on a Pajero. Before removing the radio, you need to remove some plastic trims. Remove the trim fr…

How to Change the Time on the Peugeot 208

Today's guide will show you how to set the clock on the Peugeot 208's onboard computer, following the instructions below. First, get in the car and turn on the instrument panel; then press and hold the settings button on the panel for a few seconds until the time starts to flash, as shown in the video. At this point, press the left button to correctly set the time, adjusting the hour first and then the minutes; exit the onboard computer menu to save all the changes made!

Watch the video!


by ScegliAuto

More videos