Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio from the Dashboard on Pajero

Model: Mitsubishi Pajero MK 4, V80 - Years 2006-2021
Part: Car stereo

Let’s look at removing the radio from the dashboard on a Pajero. Before removing the radio, you need to remove some plastic trims. Remove the trim frame above the centre console using a plastic lever: first, remove the air vents, then detach it from the centre console. Once you have removed the covering plastics, unscrew the securing screws located at the sides. Pull the radio out by hand and disconnect the cables (power and antenna). Fit a new radio in place of the one you removed earlier.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel from a Mitsubishi Pajero
How to Remove the Door Panel from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / MK 3, V60) Want to service your Mitsubishi Pajero? Let's look at removing the door cover panel. Use a lever to remove the protective plastic around the internal…
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / MK 3, V60) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
Removing the Door Panel of a Mitsubishi Pajero
Removing the Door Panel of a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / MK 3, V60) Remove the front left door panel on a Mitsubishi Pajero. Disconnect the battery terminals located in the engine bay. Using a screwdriver, remove the …

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos