Do it yourself
Frequently asked questions about cars and motorcycles

Removing Dashboard on Pajero V60/NT

Model: Mitsubishi Pajero MK 4, V80 - Years 2006-2021
Part: Dashboard

Required tools: specific plastic tool set (available at auto parts stores), cross screwdriver, flat screwdriver, 10mm spanner. Start by removing the two side covers, right and left, by inserting the spatula tool into the joint and gently prying towards the doors, then pulling the covers towards you. Repeat the process for the air vents on both sides of the dashboard. Disconnect all connectors attached to the vents. Repeat the process for the central climate control console using the U-groove tool in its lower right and left corners. The same operation applies to the screen/info centre. Disconnect all connectors here as well. Remove the frame under the dashboard using the same U-groove tool. Disconnect all connectors located at the bottom under the dashboard and remove all plastic plugs securing the dashboard. Unscrew all cross screws present and all 10mm bolts. Unscrew the screws securing the centre tunnel (gearbox). Pay close attention to any connectors and/or lamps, as these may vary depending on the model and production year.

Updated on 19 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Mitsubishi Pajero (1999-2006 / MK 3, V60) In this video we can see a good method for cleaning the cabin radiator of the Mitsubishi Pajero V60: it is necessary to disconnect the heating pipes …
Mitsubishi Pajero (1999-2006 / MK 3, V60) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…
Mitsubishi Pajero (1999-2006 / MK 3, V60) The following steps will show us the process of disassembling and replacing the fuel filter of the Mitsubishi Pajero 3.0 V6. First, lift the vehicle …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos