Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Mitsubishi Pajero Car Radio

Model: Mitsubishi Pajero V80, MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Car stereo

See other generations:
Video tutorial

In this tutorial, you will learn how to remove the car radio from a Mitsubishi Pajero. First, obtain some very thin plastic levers and use them to unclip the side air vents and the plastic frames around the radio: then, you can extract the entire instrument cluster.

To remove the car radio, simply unscrew the screws from the supports found on the sides and at the bottom: once unscrewed, pull the car radio towards you and disconnect the electrical connector and the other cable that comes from under the bonnet!


Updated on 21 March 2026 by ScegliAuto


Related tutorials

Replacing the Radio on Mitsubishi Pajero
Replacing the Radio on Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Remove the trim surround around the radio using a plastic lever (where the air vents are located). Once the cover panels above the centre console are…
Removing Door Panel on Mitsubishi Pajero
Removing Door Panel on Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Removing the door panel on a Mitsubishi Pajero? Here’s how to remove it from the right door. Using a screwdriver, unscrew the screws located in the s…
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
How to Remove the Steering Wheel Airbag from a Mitsubishi Pajero
Mitsubishi Pajero (1999-2006 / V60, MK 3) Before you can begin, sit in the driver's seat of your Mitsubishi Pajero. Using a Torx T30 screwdriver, start by unscrewing and removing the screws t…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos