Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the engine hood of the Mitsubishi L 200

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Checks and maintenance

Today we will discover the information that will show us how to open the hood of the Mitsubishi L 200, following these simple steps. First of all, we get into the car, on the driver's side, and start pulling the hood release lever located at the bottom; then we move to the front and release the hood latch mechanism, located in the center. At this point, we lift the hood, held by hydraulic pistons (or secure it if there is a prop rod); we gently lower the hood to close it properly.

Posted on 5 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of the Mitsubishi L 200
How to Open the Bonnet of the Mitsubishi L 200
Mitsubishi L 200 (2005-2015 / MK 2) In this brief and simple guide, follow these quick steps to open the bonnet of the Mitsubishi L 200. First, open the front door on the driver's side …
How to Open the Bonnet on the Mitsubishi L200?
How to Open the Bonnet on the Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, ope…
How to Change the Engine Oil in a Mitsubishi L 200?
How to Change the Engine Oil in a Mitsubishi L 200?
Mitsubishi L 200 (2015-2024 / MK 3) To change the engine oil in the Mitsubishi L 200, lift the vehicle to access the components underneath. Locate the oil drain plug and unscrew it to c…

Other guides you may be interested in

How to reset the tire pressure sensor of the Hyundai Tucson

Below we will discover the instructions that will allow us to reset the tire pressure warning light (TPMS) of the Hyundai Tucson. First of all, we get into the car and turn on the instrument panel; then we go to the vehicle settings until we reach the tire pressure monitor, identifying the tire with the incorrect pressure. At this point, we proceed to restore all tire pressures, following the pattern indicated on the label; in this way the TPMS system will be reset and the warning light will be reset by the instrument panel!

Watch the video!


by ScegliAuto

More videos