Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the hood of the Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years 2010-2023
Part: Checks and maintenance

In the following article, we will show you the procedure for opening the hood of the Mitsubishi ASX in case you need to replace the battery or a fuse. The procedure only takes a few seconds to be carried out and does not require any tools. To open the hood, you need to pull the release lever located at the bottom left side of the driver's side, next to the door. After pulling the lever, you need to open the hood by pulling the release lever in the center of the hood to the left. Now the hood will be open, and you can replace the battery or check the fuses in case of electrical problems.

Posted on 17 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
How to replace the air filter of the Mitsubishi ASX
How to replace the air filter of the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) If you own a first series Mitsubishi ASX and are wondering how to replace the engine air filter, then all you have to do is read the following guide …
Where is the fuse box of the Mitsubishi ASX located?
Where is the fuse box of the Mitsubishi ASX located?
Mitsubishi Asx (2010-2023 / MK 1) In order to locate the fuse box containing the fuses for your first edition Mitsubishi ASX on your own, you must first carefully read the following g…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos