Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Mitsubishi ASX

Model: Mitsubishi Asx MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

Today, follow this brief and simple guide for instructions on how to remove and replace the battery in a Mitsubishi ASX. First, open the bonnet of your car and start by removing the plastic cover located above the bumper by taking out the clips. Next, remove the intake hose to access the battery located underneath, as shown in the video.

At this point, disconnect the battery wiring (positive and negative terminals) by unscrewing the bracket screw to remove it. Then, install the new battery, ensuring it has the same amperage as the original!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of the Mitsubishi ASX
How to Replace the Key Battery of the Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) .. Today, you will learn how to replace the battery in a Mitsubishi ASX key. You will need to purchase a 3 Volt CR2032 battery.. …
How to Open the Bonnet of a Mitsubishi ASX
How to Open the Bonnet of a Mitsubishi ASX
Mitsubishi Asx (2010-2023 / MK 1) Before you can begin, open the driver's side front door of your Mitsubishi ASX. Start by pulling the bonnet release lever located near the door hinge…
Where is the fuse box located in the 2014 Mitsubishi ASX?
Where is the fuse box located in the 2014 Mitsubishi ASX?
Mitsubishi Asx (2010-2023 / MK 1) The 2014 Mitsubishi ASX has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the driver's side glove compar…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos