Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to set the clock on a Mitsubishi Outlander MK3

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Clock

See other generations:
Video tutorial

In this video, we will see how to set the clock of a 2016 Mitsubishi Outlander: we will adjust the display using the buttons on the radio. On the control panel located to the right of the radio, we notice that there are two buttons: the top one says "page", the one below says "clock". So we press the top button until we reach the "time setting" page, and on the left side of the radio display, the hour starts flashing.

The buttons below the display show the numbers of the stations that can be stored, but the central ones have arrows, right and left, so by pressing these we can change the hours and minutes: we press "page" again and we have confirmed it on the display.


Posted on 8 October 2025 by ScegliAuto


Related tutorials

How to set the clock in the Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) Setting the clock in a vehicle should be done at least twice a year, both when switching from standard time to daylight saving time and vice versa. T…
How do you set the clock in the Mitsubishi Outlander?
How do you set the clock in the Mitsubishi Outlander?
Mitsubishi Outlander (2013-2021 / MK 3) The possibility to adjust the time in the Mitsubishi Outlander is there and it is a rather simple setting to perform, in fact by watching the video a…
How to adjust the clock in the Mitsubishi Outlander instrument panel
How to adjust the clock in the Mitsubishi Outlander instrument panel
Mitsubishi Outlander (2013-2021 / MK 3) Today we will explain how to adjust the clock of the instrument panel and the radio of the Mitsubishi Outlander model mk3. To set the time, we must t…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos