Do it yourself
| ||||
|
Mitsubishi Pajero - Video tutorial
Model: Mitsubishi Pajero
V20, MK 2
- Years 1991-1999 Open the hood and put on the special support rod. Locate the container for the steering fluid: it is the small black compartment next to the huge orange one. So unscrew the cap of the black container. Go to the back of the car and remove the pin that acts as a plug for the drainage hole, as shown in the video. Connect a hose to it that can drain the liquid into the container of your choice. At this point unscrew the 8 mm nut placed under the previous one and the liquid will start to drain. Start the engine to help drain. Close the drain hole and load the new lubricant from the hole initially freed.
Posted on 9 January 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the AdBlue warning light on the Peugeot ExpertAdblue is the additive that is used to reduce nitrogen oxide emissions in diesel engines. Passenger cars of the latest generation have an additional tank for this additive. The filler cap is located next to the diesel fuel filler cap and is usually blue. When the additive level falls below a preset value, the indication appears on the control panel display that it is necessary to top up the AdBlue otherwise, within a certain number of km it will no longer be possible to start the engine. Therefore, once the additive has been refilled, the indication on the instrument panel will disappear. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.022
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |