Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Outlander
    4. : How to reset the service warning light on Mitsubishi Outlander

Mitsubishi Outlander - Video tutorial

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Checks and maintenance
Operation: How to reset the service warning light on Mitsubishi Outlander

Let's see in this video tutorial how to reset the oil service warning light on a Mitsubishi Outlander Sport, model produced from 2013 to 2021. So to perform the operation we must have the vehicle and the instrument panel turned off. Now let's go and press the "INFO" button on the left of the speedometer, press it until the oil maintenance item appears on the display. At this point, keep the same button pressed until the wrench symbol starts flashing and, while it is still flashing, press the "INFO" button again, after which the message "CLEAR" will appear on the display, indicating that the reset has occurred.


Posted on 23 October 2022 by ScegliAuto

    Frequently Asked Questions

    • Outlander 2013-2021 - What are the lights on the Mitsubishi Outlander? Read Answer
    • Outlander 2013-2021 - What does the orange petrol pump light in the instrument cluster of a Mitsubishi Outlander mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos