Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Mirage
  6. : Where is the instrument cluster fuse located in the Mitsubishi Mirage?

Mitsubishi Mirage - Video tutorial

Model: Mitsubishi Mirage LA, A00, A10 - Years 2012-2023
Part: Instrument cluster
Operation: Where is the instrument cluster fuse located in the Mitsubishi Mirage?

In the event that the instrument cluster of our Mitsubishi Mirage suddenly stops working, we can first of all check the state of the relevant fuse whose location is indicated in this video. As shown, the fuse in question is located in the box located inside the passenger compartment, in the lower left area of the dashboard on the driver's side. It is labeled with the initials F15 and its amperage is 7.5A. If faulty, make sure to replace it with a spare with the same specifications and always operate with the vehicle off, otherwise we could cause damage to the connected devices.


Posted on 23 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos