Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. Pajero
  6. : How do you replace the front shock absorber on a Mitsubishi Pajero?

Mitsubishi Pajero - Video tutorial

Model: Mitsubishi Pajero V80, MK 4 - Years 2006-2021
Part: Shock absorbers
Operation: How do you replace the front shock absorber on a Mitsubishi Pajero?

In order to replace the front shock absorber of the Mitsubishi Pajero you have to go and open the bonnet so that you can access the components inside the engine compartment: you will have to remove the battery in order to loosen the bolts located under it, which fix the shock absorber in its upper part. Then you will have to lift the car and loosen the bolts holding the corresponding wheel, removing it and accessing the components in its rear part. Here will be the bolts holding the shock absorber at the rear, which will need to be unscrewed in order to completely remove the shock absorber.


Posted on 24 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos