Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Mitsubishi Pajero

Model: Mitsubishi Pajero V80, MK 4 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

Today’s instructions will illustrate how to remove and replace the front headlamp bulb on a Mitsubishi Pajero in simple steps. First, open the bonnet of the vehicle and start by removing the plastic cap found behind the front headlamp; then disconnect the electrical connector of the bulb to remove it from the headlamp, as shown in the video.

At this point, connect the new bulb (in this case, an LED type); position the light in the optical unit and connect it, adjusting the height of the front headlamp if necessary!


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Change the Headlamp Bulb on a Mitsubishi Pajero 3
How to Change the Headlamp Bulb on a Mitsubishi Pajero 3
Mitsubishi Pajero (1999-2006 / V60, MK 3) In this video, see how to remove and replace the headlamp bulb on a Mitsubishi Pajero third series, following the instructions below. First, open the…
Replacing the Headlamp Bulb on the Mitsubishi Pajero
Replacing the Headlamp Bulb on the Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / V80, MK 4) Follow these steps to remove and replace the dipped and main beam bulb of the front headlamp on the Mitsubishi Pajero. First, open the bonnet of the …
How to Replace the Front Headlamp on a Mitsubishi Pajero?
How to Replace the Front Headlamp on a Mitsubishi Pajero?
Mitsubishi Pajero (2006-2021 / V80, MK 4) To replace the front headlamp on a Mitsubishi Pajero, open the bonnet to access the two screws that secure the headlight assembly from the top. Next,…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos