Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front headlight bulb of the Mitsubishi Pajero

Model: Mitsubishi Pajero V60, MK 3 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight bulb

See other generations:
Video tutorial

Today we will discover the instructions on how to disassemble and replace the low beam bulb of the front headlight of the Mitsubishi Pajero. First, we open the hood of the car and start removing the rubber cover of the headlight bulbs; then we disconnect the electrical connector of the lamp to remove it, as shown in the video.

At this point, we install the new low beam and high beam bulb, of the correct type (in this case, type H4); we make the electrical connection and check its operation, finally fixing the rubber cover.


Posted on 5 January 2025 by ScegliAuto


Related tutorials

Replacing the Front Headlight Bulb on a Mitsubishi Pajero
Replacing the Front Headlight Bulb on a Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / V80, MK 4) Today, you will learn how to remove and replace the front headlight bulb on a Mitsubishi Pajero in simple steps. First, open and lift the bonnet and …
How to Change the Headlamp Bulb on a Mitsubishi Pajero 3
How to Change the Headlamp Bulb on a Mitsubishi Pajero 3
Mitsubishi Pajero (1999-2006 / V60, MK 3) In this video, see how to remove and replace the headlamp bulb on a Mitsubishi Pajero third series, following the instructions below. First, open the…
Replacing the Headlamp Bulb on the Mitsubishi Pajero
Replacing the Headlamp Bulb on the Mitsubishi Pajero
Mitsubishi Pajero (2006-2021 / V80, MK 4) Follow these steps to remove and replace the dipped and main beam bulb of the front headlamp on the Mitsubishi Pajero. First, open the bonnet of the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos