Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years 2013-2021
Part: Battery

Here are the main instructions to help you remove and replace the battery in a Mitsubishi Outlander. First, open the bonnet of the vehicle and start by disconnecting the air intake duct from the air filter box; then disconnect both battery terminals (positive and negative), as shown in the video. At this point, unscrew the battery bracket screws, remove the old battery, and replace it with a new one (of the correct type and with the same amperage); install it on the battery tray and finally reattach the air intake duct!

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery of the Mitsubishi Outlander
Replacing the Battery of the Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) The steps outlined in this guide will show you how to remove and replace the battery of the Mitsubishi Outlander. First, open the bonnet of the vehic…
How to replace the battery of the Mitsubishi Outlander key
How to replace the battery of the Mitsubishi Outlander key
Mitsubishi Outlander (2013-2021 / MK 3) To correctly complete the battery replacement procedure inside the key of your third edition Mitsubishi Outlander, simply follow all the steps descri…
How to Replace the Remote Battery of a Mitsubishi Outlander
How to Replace the Remote Battery of a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) To replace the battery in the remote of a Mitsubishi Outlander, loosen the small screw located on the back of the device, just below the key. Once th…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos