Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery of the Mitsubishi Outlander

Model: Mitsubishi Outlander MK 3 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

See other generations:
Video tutorial

The steps outlined in this guide will show you how to remove and replace the battery of the Mitsubishi Outlander. First, open the bonnet of the vehicle and disconnect both battery terminals (positive and negative); then, unscrew the battery bracket screw located at the bottom, as shown in the video.

At this point, remove and replace the battery with a new one, of the correct type and with the same amperage; secure it properly with the screw at the base and reconnect it, finally checking the engine starts!


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Replacing the Battery in a Mitsubishi Outlander
Replacing the Battery in a Mitsubishi Outlander
Mitsubishi Outlander (2013-2021 / MK 3) Here are the main instructions to help you remove and replace the battery in a Mitsubishi Outlander. First, open the bonnet of the vehicle and start …
How to Replace the Key Battery in a Mitsubishi Outlander
How to Replace the Key Battery in a Mitsubishi Outlander
Mitsubishi Outlander (2007-2012 / MK 2) To correctly replace the battery inside your Mitsubishi Outlander key, follow this procedure. First, purchase a compatible button battery (model CR 2…
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
How to Replace the Engine Air Filter on a Mitsubishi Outlander 2
Mitsubishi Outlander (2007-2012 / MK 2) If you own a Mitsubishi Outlander Mk2 and need guidance on correctly replacing the engine air filter, you are in the right place. Simply read the ins…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos