Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Time the 3200 DID Engine

Model: Mitsubishi L 200 MK 2 - Years 2005-2015
Part: Timing belt

The 3200 DID engine with code 4M41 powers several Mitsubishi models such as the Pajero and L200, and is characterised by a chain-driven timing system and a cascade of gears that operate the oil pump. It is crucial that the timing alignment references are meticulously respected. Once the rocker cover and timing case are removed, the timing references, which are coloured dots applied to both the gears and the fixed references, become easily visible and must be perfectly aligned at every point.

Updated on 20 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Propshaft Joint and Bearing on a Mitsubishi L200
Removing the Propshaft Joint and Bearing on a Mitsubishi L200
Mitsubishi L 200 (1996-2005 / MK 1) Lift the vehicle as high as possible; for this job, it is advisable to use a lift. Start by unscrewing the four bolts behind the driveshaft, as shown…
Replacing Rear Light Bulb on Mitsubishi L200
Replacing Rear Light Bulb on Mitsubishi L200
Mitsubishi L 200 (2005-2015 / MK 2) In this video tutorial, you will learn how to remove the rear light and replace the bulb on a Mitsubishi L200. First, open the tailgate and unscrew t…
Where is the OBD port of the Mitsubishi L200 located?
Where is the OBD port of the Mitsubishi L200 located?
Mitsubishi L 200 (2005-2015 / MK 2) If you own a Mitsubishi L200 and want to find out where the OBD port is located, all you have to do is follow these steps. First, park the car on a f…

Other guides you may be interested in

    Frequently Asked Questions

    • L 200 2015-2024 - When to replace the Mitsubishi L 200 timing belt? Read answer

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos