Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Propshaft Joint and Bearing on a Mitsubishi L200

Model: Mitsubishi L 200 MK 1 - Years: 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Bearing

See other generations:
Video tutorial

Lift the vehicle as high as possible; for this job, it is advisable to use a lift. Start by unscrewing the four bolts behind the driveshaft, as shown in the video, removing it from the vehicle.

Once done, you can remove the propshaft joint and replace it using a flat screwdriver and a large pair of pliers (and a lot of force). As you can see, to unscrew the front part at the bearing, it is best to secure the piece in a vice.

Cut the boot using a large kitchen knife. To extract the bearing, simply "tap" it with a hammer and an intermediate tool, such as a chisel.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Wheel Bearing on the Mitsubishi L200?
How to Replace the Rear Wheel Bearing on the Mitsubishi L200?
Mitsubishi L 200 (1996-2005 / MK 1) This tutorial shows how to replace the rear wheel bearing on the Mitsubishi L200, a straightforward task that requires good manual skills. First, lif…
…
Where is the Fuse Box on the Mitsubishi L200?
Where is the Fuse Box on the Mitsubishi L200?
Mitsubishi L 200 (2015-2024 / MK 3) In this new mini guide dedicated to your Mitsubishi L200 Mk3 (2020-2023), we will discover where the fuse box is located and how to access the fuses …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos