Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Door Panel on the Mitsubishi L200 Pickup

Model: Mitsubishi L 200 MK 3 - Years 2015-2024
Part: Door trim panel

In this tutorial, you will learn how to remove the door panel on the Mitsubishi L200 pickup, a very simple and quick operation. First, open the door you will be working on, then carefully pry off the internal mirror cover using a plastic spatula. Next, remove the small cap inside the handle, unscrew the two indicated fixing screws, and, prying along the entire perimeter, separate the panel from the door. At this point, disconnect the lock cable and fit any replacement part if necessary.

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel of the Mitsubishi L200
Removing the Door Panel of the Mitsubishi L200
Mitsubishi L 200 (2005-2015 / MK 2) Discover how to remove and replace the front door panel of the Mitsubishi L200 by following these simple steps. First, open the front door and start …
Removing Door Panel on Mitsubishi L200
Removing Door Panel on Mitsubishi L200
Mitsubishi L 200 (2005-2015 / MK 2) Remove the door panel on a Mitsubishi L200. Use a screwdriver to unscrew the screws located in the space of the upper door opening lever (remove the …
What is the Fuse Diagram for the Mitsubishi L200 Pickup?
What is the Fuse Diagram for the Mitsubishi L200 Pickup?
Mitsubishi L 200 (2015-2024 / MK 3) In this video, we can see where the fuse boxes are located on the Mitsubishi L200 pickup and their respective diagrams, useful in case you need to ch…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos