Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mitsubishi
  4. :
  5. L 200
  6. : Door panel

Mitsubishi L 200 - Door panel

Mitsubishi L 200 (2015-2024 / MK 3)
How to disassemble the front door panel in the Mitsubishi L200 pick-up truck?

In this tutorial we can see how to disassemble the door panel in the Mitsubishi L200 pick-up, an extremely simple and quick operation. First, we open the door …read all…
Posted on 30 March 2024 by ScegliAuto
Mitsubishi L 200 (2005-2015 / MK 2)
Disassembling the door panel of the Mitsubishi L200.

Let's discover in this guide the instructions on how to disassemble and replace the front door panel of the Mitsubishi L200, following these simple steps. …read all…
Posted on 24 June 2023 by ScegliAuto
Mitsubishi L 200 (2005-2015 / MK 2)
Remove door panel on Mitsubishi L200

We disassemble the door panel on a Mitsubishi L200, we see the disassembly. With a screwdriver we unscrew the screws placed in the space of the upper lever of …read all…
Posted on 3 December 2023 by ScegliAuto
Mitsubishi L 200 (2005-2015 / MK 2)
How to remove the door panel on Mitsubishi L 200

How to remove the door panel on a Mitsubishi L 200? Let's see how to proceed together in this video. Before starting the disassembly work, let's disconnect the …read all…
Posted on 2 November 2023 by ScegliAuto

Car stereo (1) Bodywork (1) Key (1) Timing belt (6) -board computer (2) Checks and maintenance (9) Bearing (3) Differential (1) Brake discs (2) Cabin air filter (1) Diesel filter (1) Oil filter (3) Window lift switch (1) Rear light bulb (2) Dashboard light (1) Starter motor (1) Engine oil (3) Door panel (4) Brake pads (3) Instrument cluster (2) Wheel (5) Fuse box (7) Outside rearview mirror (2) Central tunnel (1) EGR valve (1) Steering wheel (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos