Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Mitsubishi L 200

Model: Mitsubishi L 200 MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Door trim panel

See other generations:
Video tutorial

How do you remove the door panel on a Mitsubishi L 200? Let’s see how to proceed in this video. Before starting the disassembly, disconnect the battery terminals located in the engine bay. Use a lever to remove the plastic at the corner of the window, then, with a screwdriver, unscrew the securing screws on the plastic panel.

Once all screws are removed, use the lever to detach all the plastic clips holding the door. Pull the door panel off by hand, disconnect any power connectors and release cables.

Carry out the necessary maintenance inside the door.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Filter on a Mitsubishi L 200?
How to Replace the Cabin Filter on a Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) To replace the cabin filter on a Mitsubishi L 200, open the glove compartment located on the passenger side. This will allow you to remove the securi…
How to Remove the Front Door Panel on the Mitsubishi L200 Pickup
How to Remove the Front Door Panel on the Mitsubishi L200 Pickup
Mitsubishi L 200 (2015-2024 / MK 3) In this tutorial, you will learn how to remove the door panel on the Mitsubishi L200 pickup, a very simple and quick operation. First, open the door …
Where is the Fuse Box Located on the Mitsubishi L 200?
Where is the Fuse Box Located on the Mitsubishi L 200?
Mitsubishi L 200 (2005-2015 / MK 2) To easily locate the fuse box on your Mitsubishi L 200 (2005-2015), follow the instructions in this guide. First, go inside the cabin and reach the d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos