Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. L 200
    4. : Dashboard

Mitsubishi L 200 - Dashboard

Dashboard Mitsubishi L 200 (2015-2024 / mk 3)

Mitsubishi L 200 (2015-2024 / MK 3)
Guide to Removing the Dashboard of a Mitsubishi L200
Below are the instructions that will allow you to remove and replace the entire dashboard of the Mitsubishi L200. First, get inside the cabin and start …Read all…
Posted on 16 April 2026 by ScegliAuto
Mitsubishi L 200 (2005-2015 / MK 2)
Where to Find the OBD Port on the Mitsubishi L200
If you own a Mitsubishi L200 and want to find the OBD port, follow these steps. First, park the vehicle on a level surface, then turn it off completely and …Read all…
Posted on 6 October 2026 by ScegliAuto

Dashboard Mitsubishi L 200 (2005-2015 / mk 2)

Mitsubishi L 200 (2015-2024 / MK 3)
Guide to Removing the Dashboard of a Mitsubishi L200
Below are the instructions that will allow you to remove and replace the entire dashboard of the Mitsubishi L200. First, get inside the cabin and start …Read all…
Posted on 16 April 2026 by ScegliAuto
Mitsubishi L 200 (2005-2015 / MK 2)
Where to Find the OBD Port on the Mitsubishi L200
If you own a Mitsubishi L200 and want to find the OBD port, follow these steps. First, park the vehicle on a level surface, then turn it off completely and …Read all…
Posted on 6 October 2026 by ScegliAuto
Shocks (1) Car stereo (1) Body (3) Control unit (1) Key (2) Timing belt (7) Onboard computer (2) Checks and maintenance (4) Throttle body (1) Dashboard (2) Bearing (4) Differential (2) Brake rotors (2) Headlight (1) Air filter (3) Cabin air filter (1) Diesel fuel filter (1) Oil filter (4) Clutch (2) Window switch (1) Tail light bulb (2) Instrument panel light (1) Starter motor (1) Engine oil (5) Clock (1) Door trim panel (4) Front bumper (1) Brake pads (3) Wheel (5) Fuse box (22) Side mirror (2) Warning light – error code (1) Service warning light (39) Fuel cap (2) Cylinder head (1) Center console tunnel (1) EGR valve (1) Steering wheel (1)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos