Do it yourself
Frequently asked questions about cars and motorcycles
In order to remove the gearbox of the Moto Guzzi V65, you need to loosen the screws that fix the gearbox housing: this will be located on the front lower part of the vehicle. To remove it, you will need to loosen all the screws that hold it to its supports and then disconnect all the connectors that are connected to it: this way you can place the new gearbox in its seat. Once the new gearbox is fixed and connected properly, you will need to verify that everything is working correctly.

Posted on 22 September 2024 by ScegliAuto

Video tutorial

Related tutorials

V65 In order to disassemble the gearbox of the Moto Guzzi V65, you need to completely loosen the screws that secure the box to the corresponding supports…
V65 This guide shows you how to start the Moto Guzzi V65 Cafe Racer. The first step is to position the motorcycle securely. Next, use the ignition key, i…
V65 It will be possible to disassemble the engine of the Moto Guzzi V65 by loosening the screws that fix the engine block to its housing in the center of…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos