Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To disassemble the starter motor cover of a Moto Guzzi V7, it is necessary to proceed carefully to avoid damage to the surrounding components. Start by making sure that the motorcycle is positioned on a stable surface and preferably on the center stand. Turn off the motorcycle and disconnect the battery to avoid short circuits or accidental electric shocks. The starter motor cover is fixed with some anchoring screws. You will simply need to locate them and unscrew them with the appropriate tools, such as a hex key or a screwdriver, depending on the type of screw used. Proceed to unscrew carefully, always keeping the stability of the cover under control and being careful not to lose the screws once removed. After removing all the screws, the cover should easily come off, allowing you to remove it without forcing it. If you encounter resistance, check that you have removed all the screws before proceeding further. Once the cover is removed, you will have access to the starter motor for any checks or repairs.

Posted on 13 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Air Filter Replacement on Moto Guzzi V7 3
Air Filter Replacement on Moto Guzzi V7 3
V7 Classic In this video tutorial, we will see how to disassemble and replace the air filter of a Moto Guzzi V7 3 in simple steps. Start by removing the seat of…
How to Dismantle the Rear Drive on the Moto Guzzi V7?
How to Dismantle the Rear Drive on the Moto Guzzi V7?
V7 Classic In today's tutorial video, we will see the main instructions on how to dismantle and replace the rear drive on the Moto Guzzi V7. First, lift your mo…
How to change the motor oil of a Moto Guzzi V7?
How to change the motor oil of a Moto Guzzi V7?
V7 Classic Good morning! Today we will dedicate ourselves to replacing the oil on our Moto Guzzi V7. To begin, we place the motorcycle on the center stand and l…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos