Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear light of the Moto Guzzi V7 III Stone.

Model: Moto Guzzi V7 Iii
Part: Tail light

Video tutorial

In this guide, we will go through the instructions that will allow us to disassemble and replace the rear light of the Moto Guzzi V7 III Stone. First, let's put the motorcycle on a stand and begin by removing the rider's and passenger's seat.

Next, we will unscrew the screws securing the rear fender, so we can remove it and access the interior of the light. At this point, we will unscrew the screws of the light and disconnect the wiring, removing it and replacing it with the new one. Finally, we will reassemble the rear light and the fender, checking the proper functioning of all the lights.


Posted on 15 December 2025 by ScegliAuto


Related tutorials

How to Replace the Rear Mudguard of the Moto Guzzi V7 III
How to Replace the Rear Mudguard of the Moto Guzzi V7 III
V7 Iii In this video tutorial, you will see how to disassemble and replace the rear mudguard of the Moto Guzzi V7 III, following the instructions below. Fir…
How to disassemble and repair the speedometer of the Moto Guzzi V7 III
How to disassemble and repair the speedometer of the Moto Guzzi V7 III
V7 Iii Below we will see the step-by-step instructions that will allow us to disassemble and repair the speedometer of the Moto Guzzi V7 III. First, we put …
How to Replace the Rear Brake Pads on a Moto Guzzi V7
How to Replace the Rear Brake Pads on a Moto Guzzi V7
V7 Iii Follow these instructions to remove and replace the rear brake pads on your Moto Guzzi V7. First, place your bike on the centre stand and start unscr…

How to Replace the Silencer on a Ducati Monster 696

This guide will show you how to remove and replace the silencer on a Ducati Monster 696 motorcycle, following the instructions below. First, place your motorcycle on a stand and start by unscrewing the fixing screw for the exhaust bracket. Then, disconnect the spring to remove the silencer from the exhaust manifold, as shown in the video. At this point, modify the manifold to install the new exhaust terminals; replace the entire exhaust if necessary by unscrewing the manifold nuts and applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos