Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi V7 Iii
Part:

In this video tutorial, you will see how to disassemble and replace the rear mudguard of the Moto Guzzi V7 III, following the instructions below. First, place your motorcycle on the centre stand and start by removing the rider's and passenger's seat. Then, unscrew the fixing screws of the rear mudguard, which are located on the sides, as shown in the video. At this point, unscrew the screws of the lock pin to completely remove the mudguard. Replace it and reassemble everything by applying the reverse procedure of disassembly!

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear light of the Moto Guzzi V7 III Stone.
How to disassemble the rear light of the Moto Guzzi V7 III Stone.
V7 Iii In this guide, we will go through the instructions that will allow us to disassemble and replace the rear light of the Moto Guzzi V7 III Stone. First…
How to disassemble and repair the speedometer of the Moto Guzzi V7 III
How to disassemble and repair the speedometer of the Moto Guzzi V7 III
V7 Iii Below we will see the step-by-step instructions that will allow us to disassemble and repair the speedometer of the Moto Guzzi V7 III. First, we put …
How to replace the voltage regulator on the Moto Guzzi V7 III Rough.
How to replace the voltage regulator on the Moto Guzzi V7 III Rough.
V7 Iii These brief and simple steps will show us how to disassemble and replace the voltage regulator of the Moto Guzzi V7 III Rough. First, we place the mo…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos