Do it yourself
Frequently asked questions about cars and motorcycles

Model: Moto Guzzi V11
Part: Engine oil

How to replace filter and oil on a Moto Guzzi V 11? Follow this guide to perform maintenance. Position your motorcycle on its original stand, and using a socket spanner, unscrew the bolt from the oil sump as shown in the video (drain the fluid into a container). Unscrew the cover of the container where the oil filter is located; remove the worn oil filter and fit a new one after cleaning underneath the engine. Finally, top up the new fluid in the engine and secure with the cap. Test the operation of the motorcycle.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

V11 It is recommended to use an 85w140 lubricant. The drain plug is located near the engine oil reservoir. With the motorcycle on its stand, unscrew it (…
V11 Start by removing the upper screws from the brake fluid reservoir covers on both the right and left sides. Clean the inside of the caps if there is a…
V11 You can replace the clutch on the Moto Guzzi V11 by loosening the screws that secure the engine block to its housing: it will be necessary to unscrew…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos