Do it yourself
Frequently asked questions about cars and motorcycles

Changing Gear Oil on a V11 MOTO GUZZI

Model: Moto Guzzi V11
Part: Transmission

Video tutorial

It is recommended to use an 85w140 lubricant. The drain plug is located near the engine oil reservoir.

With the motorcycle on its stand, unscrew it (using a 17mm socket or spanner). The fill plug is covered by a rubber cap. Remove this as well (using a 10mm spanner) to allow air passage for the quick drainage of the old lubricant.

Let all the oil drain into a container. Once done, replace the drain plug, tightening it properly, measure out 850 cc of oil, and insert it through the upper hole.

Replace the fill plug and cover it with its rubber cap.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

V11 You can replace the clutch on the Moto Guzzi V11 by loosening the screws that secure the engine block to its housing: it will be necessary to unscrew…
V11 Start by removing the upper screws from the brake fluid reservoir covers on both the right and left sides. Clean the inside of the caps if there is a…
V11 How to replace filter and oil on a Moto Guzzi V 11? Follow this guide to perform maintenance. Position your motorcycle on its original stand, and usi…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos