Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Engine Air Filter on a Moto Guzzi Breva 750

Model: Moto Guzzi Breva 750
Part: Air filter

This video is currently unavailable

Remove the engine air filter on a Moto Guzzi Breva 750. Follow this guide to proceed with the air filter replacement. Position the bike on a work stand, unscrew the screws around the fairings under the seat; remove the seat from the bike by unscrewing the pin on the side.

Unscrew the screws around the filter housing; remove the cap and take out the air filter (as shown in the video). Fit a new one or reposition the same after cleaning it (use an air compressor).

Close the air filter housing, reposition the seat and the fairings on the sides.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

Breva 750 To replace the air filter on a Moto Guzzi Breva 750, open the box to fully extract the filter inside. To open the box, loosen the screws located on t…
Breva 750 Before you begin, lift your Moto Guzzi Breva 750. Start by unscrewing and removing the bolts that secure the front brake caliper to the fork, then mo…
Breva 750 To adjust the valves on the Moto Guzzi Breva 750, you need to unscrew the bolts securing the cover located on the left side of the bike, just below t…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos