Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Wheel on Moto Guzzi V35

Model: Moto Guzzi V35
Part: Wheel

Video tutorial

Undo the pedal nut with a 17 mm hex key and the silencer nut with an 11 mm spanner. Remove the silencer and replace the nut to avoid losing it. Loosen the hub nut (also 17 mm) without removing it completely, just loosen it a bit. Then, work on the axle by undoing the bolt and extracting it. Now you can remove the wheel.

While doing this, take care not to lose the rubber bumpers mounted on it. If you intend to fit a new crown wheel, you will also need to remove the other silencer.


Updated on 29 March 2026 by ScegliAuto


Related tutorials

V35 In this guide, we will cover the main instructions that will allow you to remove and replace the clutch on the Moto Guzzi V35. First, place the bike …
V35 In this guide, we will see the instructions that will allow us to disassemble and remove the front wheel of the Moto Guzzi V35. First, let's place th…
V35 To dismantle the engine of a Moto Guzzi V35, you need to remove the engine block from its housing in the centre of the frame: this will also allow yo…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos