Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting Customisation Kit for Moto Guzzi V7 III

Model: Moto Guzzi V7 Classic
Part: Accessory kit

This video is currently unavailable

As is advisable every time you perform maintenance on a motorcycle or car, ensure your Moto Guzzi V7 is securely and stably positioned. This is to safeguard the operator's safety.

Now, proceed to replace the two rear-view mirrors. Using the appropriate spanner, unscrew them from their position on the handlebars and replace them with the new ones.

Next, move on to the brake lever. Using a screwdriver and the correct spanner, unscrew the pivot screw.

Remove the cable connection and then replace the old lever with the new one. Repeat the same process for the clutch lever. And that’s it!


Updated on 5 April 2026 by ScegliAuto


Related tutorials

Spark Plug Replacement on a Moto Guzzi V7 III
Spark Plug Replacement on a Moto Guzzi V7 III
V7 Classic Descriptive guide for replacing the spark plugs on a Moto Guzzi V7 III. Obtain two NGK CPR8EB-9 spark plugs. Position the bike on the side stand. Usi…
How to Replace Oil and Filter on a Moto Guzzi V7 Classic
How to Replace Oil and Filter on a Moto Guzzi V7 Classic
V7 Classic How to replace oil and filter on a Moto Guzzi V7 Classic? Follow this guide to perform maintenance. Position the motorcycle on its original stand, an…
How to Change the Engine Oil of a Moto Guzzi V7
How to Change the Engine Oil of a Moto Guzzi V7
V7 Classic Hello! Today you will change the oil on your Moto Guzzi V7. First, position the bike on the centre stand and warm up the engine for a few minutes. Ne…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos