Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. : Accessory Kit

Accessory Kit - Do-it-yourself video guides

Piaggio Mp3 Lt 300
Features of the Piaggio Mp3 LT 300 Sport scooter

In this video we will show you some features of the Piaggio Mp3 scooter. In the winter version, the Piaggio Mp3 scooter is equipped with an oversized …read all…
Posted on 6 May 2024 by ScegliAuto
Keeway Rkf 125
How to apply additional lights to the Keeway RKF 125

The guide shows how to apply the additional lights to the Keeway RKF 125. Doing so could void the vehicle's warranty. After disassembling the saddle of the …read all…
Posted on 27 February 2024 by ScegliAuto
Moto Guzzi V7 Classic
Assembly of the Moto Guzzi V7 III personalization kit

As it would be good to do every time you want to carry out a maintenance operation on a motorcycle or a car, we should make sure that our Moto Guzzi V7 is …read all…
Posted on 11 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos