Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi V 7
Part: Engine oil

Before starting, position your Moto Guzzi V7 upright using the appropriate motorcycle stand. Before proceeding with the removal of the used engine oil, it is advisable to run the engine for a few minutes. Start by unscrewing and removing the lower oil drain nut to let the engine oil out. Once all the engine oil has drained, re-screw the drain nut, then unscrew and remove the upper refill cap. At this point, using a funnel, pour in the new engine oil, then re-screw the refill cap. Once you have completed this step, you will have finished the oil change.

Updated on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust of the Moto Guzzi V7
How to Replace the Exhaust of the Moto Guzzi V7
V 7 To replace the exhaust of the Moto Guzzi V7, first loosen the screw located at the rear of the exhaust itself, corresponding to the support. Once thi…
How to Remove the Rear Mudguard of the Moto Guzzi V7?
How to Remove the Rear Mudguard of the Moto Guzzi V7?
V 7 To remove the rear mudguard of the Moto Guzzi V7, first remove the seat to access the screws underneath. The screws to loosen are located on the side…
How to Clean the Air Filter on a Moto Guzzi V7
How to Clean the Air Filter on a Moto Guzzi V7
V 7 How to clean the engine air filter on a Moto Guzzi V7? Position the scooter on a mounting stand, and using a screwdriver, unscrew the securing screws…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos