Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Moto Guzzi V 7 - Video guides

Moto Guzzi V 7
How to Adjust the Valve Clearance on a Moto Guzzi V7
Let's see how to adjust the valves on the Moto Guzzi V7: first, position the piston at top dead centre (TDC) during the compression stroke by rotating the …Read all…
Posted on 7 July 2026 by ScegliAuto
Moto Guzzi V 7
How to disable traction control on a Moto Guzzi V7
In this video we see how to deactivate the traction control on a Moto Guzzi V7: start the engine, locate the button, which is the start button. Through this, …Read all…
Posted on 11 September 2025 by ScegliAuto
Moto Guzzi V 7
Installing Biondi Fairings on a Moto Guzzi V7
Learn how to install an aftermarket fairing from Biondi on a Moto Guzzi V7. Unscrew one of the two screws that secure the headlight to its brackets, take the …Read all…
Posted on 6 September 2026 by ScegliAuto
Moto Guzzi V 7
How to Replace the Exhaust of the Moto Guzzi V7
To replace the exhaust of the Moto Guzzi V7, first loosen the screw located at the rear of the exhaust itself, corresponding to the support. Once this is …Read all…
Posted on 18 October 2026 by ScegliAuto
Moto Guzzi V 7
How to Remove the Rear Mudguard of the Moto Guzzi V7?
To remove the rear mudguard of the Moto Guzzi V7, first remove the seat to access the screws underneath. The screws to loosen are located on the side of the …Read all…
Posted on 4 June 2026 by ScegliAuto
Moto Guzzi V 7
How to Change the Engine Oil on a Moto Guzzi V7
Before starting, position your Moto Guzzi V7 upright using the appropriate motorcycle stand. Before proceeding with the removal of the used engine oil, it is …Read all…
Posted on 21 May 2026 by ScegliAuto
Moto Guzzi V 7
How to Clean the Air Filter on a Moto Guzzi V7
How to clean the engine air filter on a Moto Guzzi V7? Position the scooter on a mounting stand, and using a screwdriver, unscrew the securing screws of the …Read all…
Posted on 27 March 2026 by ScegliAuto

See also:

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos