Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi V 7
Part: Windshield

Learn how to install an aftermarket fairing from Biondi on a Moto Guzzi V7. Unscrew one of the two screws that secure the headlight to its brackets, take the new longer screw from the mounting kit, and assemble the series of spacers that will allow you to mount the fairing support. Repeat the same operation on the other side of the headlight. Take the fairing from its box, which you can choose from the three available sizes for this motorcycle model to achieve the desired look and functionality, and install the rubber mounts in the four holes. Using the screws provided in the kit, mount the fairing onto its brackets.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the Air Filter on a Moto Guzzi V7
How to Clean the Air Filter on a Moto Guzzi V7
V 7 How to clean the engine air filter on a Moto Guzzi V7? Position the scooter on a mounting stand, and using a screwdriver, unscrew the securing screws…
How to Remove the Rear Mudguard of the Moto Guzzi V7?
How to Remove the Rear Mudguard of the Moto Guzzi V7?
V 7 To remove the rear mudguard of the Moto Guzzi V7, first remove the seat to access the screws underneath. The screws to loosen are located on the side…
How to Replace the Exhaust of the Moto Guzzi V7
How to Replace the Exhaust of the Moto Guzzi V7
V 7 To replace the exhaust of the Moto Guzzi V7, first loosen the screw located at the rear of the exhaust itself, corresponding to the support. Once thi…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos