|
Do it yourself
| |||
| ||||
Model: Moto Guzzi V 7
To remove the rear mudguard of the Moto Guzzi V7, first remove the seat to access the screws underneath. The screws to loosen are located on the side of the mudguard and in front of the battery compartment. The last screw to loosen is on the horizontal steel bracket: once this is removed, the mudguard can be taken off after disconnecting the connectors. Once the old mudguard is removed, install the new piece, secure it with the appropriate bolts, and reconnect all the connectors.
Updated on 23 April 2026 by ScegliAuto
Video tutorial
Related tutorials
V 7
Before starting, position your Moto Guzzi V7 upright using the appropriate motorcycle stand. Before proceeding with the removal of the used engine oi…
V 7
To replace the exhaust of the Moto Guzzi V7, first loosen the screw located at the rear of the exhaust itself, corresponding to the support. Once thi…
V 7
How to clean the engine air filter on a Moto Guzzi V7? Position the scooter on a mounting stand, and using a screwdriver, unscrew the securing screws…
|
How to Replace the Battery in a Yamaha FZ6?
Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
