|
Do it yourself
| |||
| ||||
Model: Moto Guzzi V 7
To replace the exhaust of the Moto Guzzi V7, first loosen the screw located at the rear of the exhaust itself, corresponding to the support. Once this is loosened, you will need to unscrew the one located at the fixing ring at the front of the exhaust: by loosening this, the part will be freed, allowing you to completely remove the exhaust from the end of the system. This will enable you to insert the new exhaust, securing it with the appropriate screws at the supports.
Updated on 22 July 2026 by ScegliAuto
Video tutorial
Related tutorials
V 7
To remove the rear mudguard of the Moto Guzzi V7, first remove the seat to access the screws underneath. The screws to loosen are located on the side…
V 7
Learn how to install an aftermarket fairing from Biondi on a Moto Guzzi V7. Unscrew one of the two screws that secure the headlight to its brackets, …
V 7
Before starting, position your Moto Guzzi V7 upright using the appropriate motorcycle stand. Before proceeding with the removal of the used engine oi…
|
How to Remove the Final Drive from a BMW R 1200 GS?
To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
