Do it yourself
| ||||
|
Model: Moto Guzzi V7 Classic
In today's video we will see how to remove the rear wheel of a Moto Guzzi V7. To begin we go to lift our motorbike with the stand; we disconnect our rear suspension from the wheel hub, unscrewing the bolt with a key and counter key. At this point we move on to the other side to perform the same operation: unscrew the central bolt of the rear wheel and also unscrew the fixing screws of the brake caliper, in order to release it from the disc. We just have to remove the rear wheel permanently, as shown in the video tutorial!
Posted on 27 February 2024 by ScegliAuto
|
How do you replace the fork of the Beta Xtrainer?The replacement of the Beta Xtrainer fork is done by loosening the screws that fix the front wheel to its housing: the screws will be located on the sides of the lower part of the fork. Furthermore, it will be necessary to unscrew the screws that fix the front brake caliper, so that it is removed from the disc. Now it will be possible to proceed by removing the wheel so that the fork is released: the fork must in turn be detached from its housing by loosening the screws on the upper part and removing the clamps corresponding to the fender. By doing so, it will be possible to insert the new fork and assemble all the removed parts. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.003
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |