Guzzi V7 III Customisation Kit No. 3

Model: Moto Guzzi V7 Iii
Part: Exhaust muffler

This video is currently unavailable

First, ensure your Guzzi V7 III is stable and secure to guarantee the operator's safety. This step should be taken every time maintenance is performed.

Now, remove the two bolts (one at the junction and the other at the pin) that secure the exhaust in place, then remove it and replace it with the new one. Tighten the bolt on the pin and the clamp at the junction, and the first part is complete! Repeat the same operation for the exhaust on the other side of the bike to complete this customisation task.

Updated on 30 April 2026 by ScegliAuto

Related tutorials

Fitting the 2nd Customisation Kit

V7 Iii As is advisable whenever performing maintenance on a motorcycle, secure your Moto Guzzi V7 III on a stable and safe stand. This way, you ensure the o…

How to Install Rearsets on the Moto Guzzi V7 III

V7 Iii In this video tutorial, you will learn how to install rearsets on the Moto Guzzi V7 III, following the instructions below. First, place the stand on …

How to Replace the Exhaust on a Moto Guzzi V7 III?

V7 Iii To replace the exhaust on the Moto Guzzi V7 III, loosen the screws that secure the exhaust terminal to its housing near the rear wheel on the right s…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!

by ScegliAuto

Guzzi V7 III Customisation Kit No. 3

Related tutorials

How to Replace the Headlight Bulb on the Suzuki Address 110

More videos