Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on the Moto Guzzi V7 Stone

Model: Moto Guzzi V7 Stone
Part:

Video tutorial

Today, you will see in this video tutorial how to remove and replace the front brake lever and the clutch lever on the Moto Guzzi V7 Stone. First, remove the old front brake lever; to do this, unscrew the small bolt using two spanners or sockets, removing the pin. At this point, remove and replace the lever with the correct new one; fit it properly and secure it with the bolt, then make the necessary adjustment.

Follow the same procedure for replacing the clutch lever, watching the video until the end!


Updated on 11 May 2026 by ScegliAuto


Related tutorials

How to Replace the Brake and Clutch Levers on the Moto Guzzi V7 Stone
How to Replace the Brake and Clutch Levers on the Moto Guzzi V7 Stone
V7 Stone These brief and simple steps will guide you on how to remove and replace the brake and clutch levers on the Moto Guzzi V7 Stone. First, place the mot…
How to Replace the Front Brake Pads on the Moto Guzzi V7 Stone
How to Replace the Front Brake Pads on the Moto Guzzi V7 Stone
V7 Stone By following these brief steps, see how to disassemble and replace the front brake pads on the Moto Guzzi V7 Stone. First, place the bike on a stand …
How to Replace the Exhaust Terminals of a Moto Guzzi V7 Stone
How to Replace the Exhaust Terminals of a Moto Guzzi V7 Stone
V7 Stone In this brief guide, you will find the instructions to remove and replace the exhaust terminals of a Moto Guzzi V7 Stone. First, place the bike on th…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos