Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake and Clutch Levers on the Moto Guzzi V7 Stone

Model: Moto Guzzi V7 Stone
Part:

Video tutorial

These brief and simple steps will guide you on how to remove and replace the brake and clutch levers on the Moto Guzzi V7 Stone. First, place the motorcycle on a stand and begin unscrewing the bolt of the front brake lever pivot to remove it; similarly, remove the clutch lever by disconnecting the cable, as shown in the video.

Now install the new compatible levers, fitting the brake lever and adjusting its travel; do the same for the clutch lever, adjusting the cable at the adjuster nut.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Brake and Clutch Levers on the Moto Guzzi V7 Stone
How to Replace the Brake and Clutch Levers on the Moto Guzzi V7 Stone
V7 Stone Today, you will see in this video tutorial how to remove and replace the front brake lever and the clutch lever on the Moto Guzzi V7 Stone. First, re…
How to Replace the Front Brake Pads on the Moto Guzzi V7 Stone
How to Replace the Front Brake Pads on the Moto Guzzi V7 Stone
V7 Stone By following these brief steps, see how to disassemble and replace the front brake pads on the Moto Guzzi V7 Stone. First, place the bike on a stand …
How to Replace the Exhaust Terminals of a Moto Guzzi V7 Stone
How to Replace the Exhaust Terminals of a Moto Guzzi V7 Stone
V7 Stone In this brief guide, you will find the instructions to remove and replace the exhaust terminals of a Moto Guzzi V7 Stone. First, place the bike on th…

How to Replace Engine Oil in the Husqvarna TE 610?

In this tutorial, you will see how to replace the engine oil in the Husqvarna TE 610, a very simple and quick operation. Before proceeding, wait for the engine to cool completely to operate safely. Start by removing the lower protection panel, then locate the drain bolt on the right side and loosen it using a 14 mm socket spanner. Once all the oil has drained from the system, remove the filter, clean it of any dirt residue, and reassemble everything. Finally, insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos